Just fill in the form below, click submit, you will get the price list, and we will contact you within one working day. Please also feel free to contact us via email or phone. (* is required).

study on optimal conditions of high purity poly ferric chloride factory price

  • Study on optimal conditions of poly ferric chloride

    2021-1-1 · According to the progress, the study investigated the optimal operating conditions of PFC, to get the best treatment efficiency with reasonable cost. The treatment efficiency of PAC in the reference studies will also be compared with PFC under optimal conditions.

    Get Price
  • Comparison of poly ferric chloride and poly titanium ...

    2021-1-28 · According to the results of the study, the optimal coagulant PTC and PFC dosage was 600 and 800 mg/L, respectively. Therefore, the costs of the coagulation-flocculation process for treatment of 1 m 3 of paper and cardboard wastewater using PTC and PFC were estimated to …

    Get Price
  • Synthesis and evaluation of cationic flocculant

    Results showed that the optimal conditions for the flocculation of coal chemical wastewater using P(DAC-MAPTAC-AM) alone are as follows: dosage of 8-12 mg/L, G value of 100-250 s -1, and pH value of 4-8. The optimal dosage of PAFC is 90-150 mg/L with a pH of 2-12.

    Get Price
  • Preparation and coagulation efficiency of

    2011-7-1 · Journal of Environmental Sciences 2011, 23(7) 1122–1128 Preparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production Xiaoxia Niu ∗ , Xili Li, Jihong Zhao, Yigang Ren, Yanqin Yang Henan Provincial Key Laboratory of Surface and Interface Science, School of Materials and Chemical Engineering ...

    Get Price
  • Synthesis, purification and characterization of ...

    2015-5-26 · Taking blast furnace dust and aluminum dross as raw material, PAFC with high (Al + Fe) b content was prepared via optimizing Al/Fe molar ratio and basicity condition in this study. Separation, purification and characterization of (Al + Fe) b were further investigated. The results showed that the (Al + Fe) b content in PAFC peaked at 36.67% with Al/Fe = 7:3 and basicity(B)=1.8.

    Get Price
  • Efficiency Comparison of PolyDADMAC Coagulant

    2017-11-1 · The aim of this study was to evaluate and compare of PolyDADMAC with ferric chloride as a coagulant on the removal of turbidity, Coliform and Organic matter from Ahvaz drinking water. Materials and Methods: This study was carried out in a lab scale and using a …

    Get Price
  • A highly efficient conditioning process to improve

    2019-4-1 · Given this background, this study: (1) investigated the effect of the combined Ca(ClO) 2 /ferric coagulant/WS treatment on sludge dewaterability and EPS properties, with the goal of optimizing the operating conditions for the combination treatment; (2) clarified the mechanism of the combined treatment by analyzing the morphological structure, flocs morphology, rheological behavior, and bound water; …

    Get Price
  • Find Pure, Colorless octadecyltrimethylammonium

    Find a host of high-grade, pure and colorless octadecyltrimethylammonium chloride at Alibaba.com for various chemical and pharmaceutical purposes. These octadecyltrimethylammonium chloride are …

    Get Price
  • Aluminium Coagulant - an overview | ScienceDirect

    After the treatment at optimal conditions of PAC dosage of 350 mg/L, cationic PAM dosage of 8.0 mg/L, and 0.4–0.6 mm ceramsite media in the filtration process, the residual NH + 4-N, TN, Mn and As in the leachate was able to meet the maximum permissible values for landfill leachate discharge in China but not for COD and total phosphorus.

    Get Price
  • Landfill Leachate Treatment Through Coagulation ...

    2021-6-7 · Using the gradient of proposed equations, the way to achieve higher efficiency with the least change of the mentioned variables was expressed. The results showed that under optimal conditions, operating costs would be reduced by 54,324 IRR per treatment of 1 m 3 of leachate while achieving affordable COD removal efficiency. Also, the amount of sludge formed as one of the limiting …

    Get Price
  • A highly efficient conditioning process to improve

    2019-4-1 · High levels of extracellular polymeric substances (EPS) and bound water in sludge negatively impact sludge dewaterability. This study applied a novel sludge conditioning process involving calcium hypochlorite (Ca(ClO) 2) oxidation, ferric coagulant re-flocculation, and walnut shell (WS) skeleton construction to remove EPS and bound water and improve sludge dewaterability.

    Get Price
  • Analysis of purified oligomeric proanthocyanidins

    2021-6-20 · Hence, the optimal concentration of ethanol was of 70%. The purity of LOPC purified by HP2MGL resin increased drastically from 51.72% to 92.20% (w/w) under optimal conditions (feeding flow rate of 3 BV/h; elution velocity of 2 BV/h; volume fraction of 70% ethanol). The purity of LOPC was higher than those obtained from Elaeagnus angustifolia L.

    Get Price
  • Factory Supply Poly Aluminium Chloride /pac,28%

    Factory Supply Poly Aluminium Chloride /pac,28% Price Per Ton , Find Complete Details about Factory Supply Poly Aluminium Chloride /pac,28% Price Per Ton,Polyaluminium Chloride Powder,Polyaluminium Chloride Wastewater Treatment,High Basicity Polyaluminium Chloride from Water Treatment Chemicals Supplier or Manufacturer-Chifeng Fuyue Activated Carbon Factory

    Get Price
  • Optimization and economic evaluation of modified ...

    2018-10-17 · Chemicals. Poly-aluminum chloride (Al 2 (OH) n Cl 6−n.YH 2 O, Al 2 O 3 = 30%wt, basicity = 65% and pH = 3) was used as a coagulant and anionic (A 300), cationic (C 270) and nonionic polymers, as the coagulant aids were provided from AquaTech Company, Switzerland.. Preparation of solution. In order to prepare a 10 percent clear solution for coagulant, 10 g of PAC was dissolved to 100 mL of ...

    Get Price
  • Preparation of a novel inorganic polymer coagulant

    2011-1-30 · Fig. 2 is TEM microphotographs of the novel inorganic polymer coagulants which were prepared by different acids as lixiviants at 12:1 (Al + Fe)/Si mole ratio and 10:1 (Al + Fe)/NaOH volume ratio, and the leaching acid is a simplex hydrochloric acid or the mixture of sulfuric acid and hydrochloric acid, so they could be named poly-ferric-aluminum-silicate-chloride (PFASC) or poly-ferric ...

    Get Price
  • Effective treatment of spacer tube reverse osmosis ...

    2020-4-1 · In this study, coagulation followed by the electro-oxidation (EO), and electro-coagulation (EC) methods were studied. Each of these processes was used to treat the spacer tube reverse osmosis membrane concentrated leachate from an incineration plant. A single factor experiment was used to determine the optimal conditions for each individual ...

    Get Price
  • Study on catalytic conversion of cellulose to 5 ...

    2021-6-25 · Full Article. Study on Catalytic Conversion of Cellulose to 5-Hydroxymethyl Furfural by Directional Degradation in Deep Eutectic Solvents. Hongyan Yang, a Jinyan Lang, a Junliang Lu, a Ping Lan b and Heng Zhang, a,b,c, * The direct conversion of microcrystalline cellulose (MCC) degrading into 5-hydroxymethyl furfural (5-HMF) was studied using four synthetic deep eutectic solvents (DESs) as ...

    Get Price
  • Aluminium Coagulant - an overview | ScienceDirect

    High basicity coagulants include polyaluminium chloride (PACl), aluminium chlorohydrate (ACH), polyaluminium chlorosulphate (PACS) and polyaluminium silicate sulphate (PASS). There are several grades of PACl containing 10%, 18% or 24% w/w Al 2 O 3, the 10% and 18% w/w grades being the most commonly available.

    Get Price
  • Gamma‐aminobutyric acid production by

    2020-8-20 · The optimal amount of GABA was measured by using high‐performance liquid chromatography. The results of the central composite design of the response surface methodology at a significant level of 95% showed that the optimal treatment was 14.96% whey powder, 4.95% MSG at temperature of 37°C and fermentation for 48 hr and under these conditions ...

    Get Price
  • Improvement in the coagulation performance by

    2008-6-18 · Analytical grade PAC (poly aluminum chloride, Backkwang Chem-ical) and FeCl3 (ferric chloride, Wako Chemical) were selected as single coagulants in this study. Blended coagulants were prepared with a mixture of PAC and Ferric chloride in the ratios of 1.45, 0.48, and 0.16 mM Al/mM Fe and labeled as the blend coagulant I, II, and III, respectively.

    Get Price
  • Optimal conditions of Al and Fe extraction from

    2012-8-9 · This paper reports pioneering work in identifying an alternative coagulation agent of wastewater treatment, given the availability of commonly used agents are of a higher cost relative to more natural sources, such as soil. The alternative proposed is laterite soil from northern Malaysia because it contains high amounts of Al and Fe, which are well-known coagulants.

    Get Price
  • Journal of Environmental Health and Sustainable ...

    Introduction: The objective of this study was to investigate wastewater quality and the efficiency of removal of wastewater contaminants produced by a tile factory by using ferric chloride, ferrous sulfate, ferric sulfate, aluminum sulfate (alum) and poly-aluminum chloride (PAC) coagulants. Materials and Methods: This is an applied study.

    Get Price
  • Improvement of the process of removing

    2019-6-1 · At optimal operating conditions of Fe:P (w/w) ratio = 2.40, pH = 6.48 and FMS = 100 rev min − 1, 97.85% removal of phosphorus was achieved. Moreover, compared with the one-off dosage, the three-step process treatment can save 50% of the cost in terms of ferric chloride when treating the same amount of distillery effluent.

    Get Price
  • (TITLE OF THE THESIS)*

    2019-4-3 · optimal dosage of coagulants for subsequent ultrafiltration (UF) tests. The efficiency of three coagulants (alum, ferric chloride, and a blend of polyaluminum chloride and polyamine) was evaluated. The membranes were composed of polyethersulfone (PES) and had a pore size of 0.05 microns.

    Get Price
  • (PDF) Flocculation activity of novel ferric chloride ...

    2020-9-17 · the optimal conditions were 381.29 4.42 M Fe(II)/g dry weight (DW), 613.11 9.32 M Trolox/g DW and 135.94 0.52 mg gallic acid equivalent (GAE)/g DW, respectively. In addition, the major antioxidant components in the extract were detected by high-performance liquid chromatography

    Get Price
  • Effects of Microwave-Assisted Extraction Conditions on ...

    2013-8-30 · The flocculation efficiency of polyaluminum chloride (PAC) is closely related to the distribution and structure of its Al species, and Al13 is the optimal species in PAC for flocculation. A series of PAC containing Ca was prepared by adding Ca before and after the basifying reaction. The effects of Ca on the Al species were studied by 27 Al nuclear magnetic resonance (NMR) and atomic …

    Get Price
  • Effects of Ca on the distribution, structure and ...

    2020-8-20 · The optimal amount of GABA was measured by using high‐performance liquid chromatography. The results of the central composite design of the response surface methodology at a significant level of 95% showed that the optimal treatment was 14.96% whey powder, 4.95% MSG at temperature of 37°C and fermentation for 48 hr and under these conditions ...

    Get Price
  • Preparation and Study of a Composite Flocculant for ...

    2013-12-24 · polyaluminium ferric chloride and cationic polyacryla-mide, we tried to prepare a composite flocculant consist-ing of sodium alginate, polyaluminium ferric chloride and cationic polyacrylamide to treat papermaking waste- water. The main objective of this study was to evaluate the flocculation performance of the composite flocculant. 2.

    Get Price
  • Research Article Simultaneously Recovering High-Purity ...

    2019-7-30 · out to determine the optimal conditions on polyaluminium chloride treatment with the change of the dose ( .mL), pH ( . .), temperature ( C), and the time ( min). Similarly, the optimal conditions were determined on cationic polyacrylamide treatment. Moreover, combina-tion of two occulants was carried out in the same ve

    Get Price
  • Efficiency comparison of alum and ferric chloride ...

    2016-4-14 · Results showed that the ferric chloride has more removal efficiency than alum in removal of COD, TSS and dye. The most removal of COD, TSS and dye using alum was obtained 36, 19 and 68.8% while for ferric chloride was obtained 72, 60 and 98% respectively. The optimum pH 7 and 5 were obtained for alum and ferric chloride respectively.

    Get Price
  • Optimizing Chemically Enhanced Primary Treatment

    2019-3-16 · The optimal coagulant (15 mg/L ferric chloride) and flocculant (0.5 mg/L poly aluminum chloride (PACl)) combination achieved total COD, soluble COD, total suspended solids (TSS), and total phosphorus (TP) removal efficiencies of 76, 58, 89, and 84, respectively, in a full-scale

    Get Price
  • Optimization and economic evaluation of modified ...

    2018-10-17 · Chemicals. Poly-aluminum chloride (Al 2 (OH) n Cl 6−n.YH 2 O, Al 2 O 3 = 30%wt, basicity = 65% and pH = 3) was used as a coagulant and anionic (A 300), cationic (C 270) and nonionic polymers, as the coagulant aids were provided from AquaTech Company, Switzerland.. Preparation of solution. In order to prepare a 10 percent clear solution for coagulant, 10 g of PAC was dissolved to 100 mL of ...

    Get Price
  • Aluminum Chlorohydrate: | WaterWorld

    1999-3-1 · Aluminum Chlorohydrate: As water treatment plants strive to meet stricter standards, many are turning to aluminum chlorohydrate (ACH) to improve finished water quality, control costs and enhance efficiency. This specialized coagulant also can help reduce chemical solids and alkali usage while helping plant operations. Mar 1st, 1999.

    Get Price
  • Application of sodium ferrate produced from

    2019-4-1 · This vessel was put on a magnetic stirrer at 350 rpm for 5 min. Thereafter, 56 g of NaOH was removed with a pipette and injected slowly into the NaOH vessel. After mixing at 450 rpm for 12 min, 3.71 g ferric chloride (40%) (7.31 g pickling liquid instead of ferric chloride for SF-W) was slowly injected to the bottom of the reactor mixture.

    Get Price
  • Highly selective synthesis of d -amino acids via ...

    2021-1-9 · d-Amino acids are increasingly used as building blocks to produce pharmaceuticals and fine chemicals. However, establishing a universal biocatalyst for the general synthesis of d-amino acids from cheap and readily available precursors with few by-products is challenging. In this study, we developed an efficient in vivo biocatalysis system for the synthesis of d-amino acids from l-amino acids ...

    Get Price
  • Synthesis and characterization of calcium carbonate ...

    2020-4-21 · In this study, a procedure for producing calcium carbonate whisker through yellow phosphorus slag carbonation without adding any crystal control agents was proposed. The influence of process parameters on the crystal phase and morphology of the product was discussed. The content of aragonite in the product was more than 90% under optimal conditions. The whiteness of the product …

    Get Price
  • Effects on Effluent Quality of Industrial Waste Water ...

    2019-7-1 · The coagulant dosage of ferric chloride ranged between 0.5 g/L and 3 g/L, whereas the concentrations of polyelectrolyte and clay minerals varied between 5-75 mg/L and 25-750 mg/L, respectively. The optimal condition was obtained at the dosage 2 g/L ferric chloride at pH 11 with the COD removal efficiency of 71%.

    Get Price
  • www.jmaterenvironsci

    2020-6-26 · (CCD) was employed to study and optimize the CF process using alum, ferric chloride, and poly aluminum chloride as the coagulants. The results showed that maximum COD reduction (56.06%) was obtained using alum at the optimal condition of 560 …

    Get Price
  • Treatment of highly turbid water in disaster conditions ...

    Another study by Baghvand et al. reported that the highest turbidity removal by using alum and ferric chloride as coagulant was 82.9–99.0 and 92.9–99.4%, respectively (Baghvand et al. 2010). Agbovi & Wilson (2019) examined and optimized the removal efficiency of turbidity using an amphoteric chitosan-based flocculant–ferric chloride by ...

    Get Price
  • A facile preparation of immobilized naringinase on ...

    A facile preparation of immobilized naringinase on polyethyleneimine-modified Fe3O4 magnetic nanomaterials with high activity Chan Yu,a Qian Li, *a Jing Tian,a Honglei Zhan,a Xinyu Zheng,a Shujing Wang,a Xitong Sun*b and Xiyan Sun*c Polyethyleneimine-modified Fe

    Get Price
  • 2.3. Algal production

    2016-1-6 · Chromium pollution is a serious issue because of carcinogenic toxicities of the pollutants and low recovery rate of chromium because of the presence of organic, such as protein and fat. In this work, high recovery rate and high purity of the chromium ion were successfully prepared by the way of acid enzyme, flocculant, and Fenton oxidation. The experiments were characterized by TG, TOC, UV-VIS ...

    Get Price
  • Simultaneously Recovering High-Purity Chromium

    Pretreatment. Myat et al. conducted a testing study to evaluate the pretreatment of oxidation and coagulation on ceramic microfiltration (CMF) and subsequently reverse osmosis (RO) in an advanced treatment train for water reuse.The use of coagulation with either ozone (O 3) or ultraviolet hydrogen peroxide (UV/H 2 O 2) and coagulation with poly aluminum chloride helped to sustain a high flux ...

    Get Price
  • Membrane processes - Arabi - 2020 - Water

    2017-3-2 · Due to their unique properties, lignosulfonates have a wide range of uses, such as animal feed, pesticides, surfactants, additives in oil drilling, stabilizers in colloidal suspensions, and as plasticizers in concrete admixtures. 13, 14, 31-34 However, the majority of pulp mills employ kraft technology for pulp production, and thus, kraft lignin is more readily available for value-added ...

    Get Price
  • Production and Application of Lignosulfonates and ...

    2019-5-26 · Supporting Information S-3 graphene sheets.1 Briefly, a Cu foil was treated in nitric acid solution in water (5:2 v:v) for 2.5 min in order to remove all Cu oxide. Next, the foil was dried under argon (Ar) gas. Typically a small residue of nitric acid remains on the Cu surface, which will later dope the graphene sheet.2 To increase the chance of the single layer growth, a pocket was made out ...

    Get Price
  • Comparing Aluminium Sulfate and Poly-Aluminium

    2021-7-13 · of aluminium sulfate and poly-aluminum chloride was evaluated at different pH values and coagulant dosage in order to find optimal operational conditions for low to high turbidity waters. The influence of lime, as a coagulant aid, on coagulation process was also studied. A set of jar test experiments was conducted to find the

    Get Price
  • Study on optimal biodegradation of terephthalic acid by

    optimal nitrogen source was urea with its concentration of 1400 mg/l. The optimal conditions for TA degradation were optimized by orthogonal test. The test result showed the pH 7.0, temperature of 30°C and shaking speed of 140 rpm were the best condition for degradation. In that condition, terephthalic

    Get Price
  • Efficacy of Removal of CCL Viruses under Enhanced ...

    2019-12-30 · on full-scale facility flows, a high flow rate of 0.5 gpm (1.9 L/min) and a low flow rate of 0.25 gpm (1.0 L/min) were selected. The plant was operated for three HRTs prior to sampling such that steady-state conditions were achieved (6 and 12 h for the high and low flow rates, respectively). The addition of bacteriophages, ferric chloride, polymer,

    Get Price
  • An alternative method for preparation of

    Abstract The drawbacks, high energy consumption, rigorous preparation condition and high impurity contents, have been well-recognized in the preparation of widely-used polyaluminum chloride via conventional methods in industrial scale. In order to overcome the drawbacks, the fresh aluminum hydroxide gels were proposed to prepare the polyaluminum chloride (PACG) in this study. The optimal ...

    Get Price
  • Multiple response optimization of the coagulation

    2016-5-18 · The results of F = 18.175 > F 0.05,1,15 = 4.543 and R 2 = 0.90 for the PO 4 3−-P removal efficiency illustrated that the second-order polynomial model fitted the experimental results well.

    Get Price
  • effluent samples showed variations in the following ...

    effluent samples showed variations in the following characteristics TSS COD from INHS 105 at Iloilo Science and Technology University - formerly Western Visayas College of Science and Technolog

    Get Price
  • Effective approach to organic acid production from ...

    2018-11-20 · The biotransformation of agricultural waste into valuable chemicals represents a promising approach in the field of biorefining. Herein, a general but highly efficient and robust process is reported for the production of organic acid from kimchi cabbage waste using lactic acid bacteria. The organic acid produced was tested for efficacy as a biological control agent.

    Get Price
  • Polyol Silver Nanowire Synthesis and the Outlook for a ...

    2020-2-29 · Silver nanowires (AgNWs) have a broad range of applications including nanoelectronics, energy conversion, health care, solar cells, touch screens, sensors and biosensors, wearable electronics, and drug delivery systems. As their characteristics depend strongly on their size and morphology, it is essential to find the optimal and most cost-effective synthesis method with precise control over ...

    Get Price
  • Operating Conditions of Coagulation-Flocculation

    This work attempted to determine the optimum conditions required for the coagulation and flocculation process as an essential stage of the ceramic wastewater treatment. Coagulation and flocculation is a very necessary step in industries as it lessens turbidity, color, and odor of wastewater. The experimental work was performed in several runs.

    Get Price
  • IOP Conference Series: Materials Science and

    We report a facile and environmentally friendly solid-state method to prepare mesoporous wollastonite (calcium silicate, CaSiO 3) based composite adsorbent from chicken eggshells and SiO 2 powder as starting materials for food dyes removal, i.e. brilliant blue. The CaSiO 3 particles were prepared using CaCO 3 /SiO 2 molar ratio of 1:5 and 2:5 and calcined at 1100°C.

    Get Price
  • Ferric Chloride, Coagulant | Beckart Environmental

    Ferric Chloride. Ferric chloride is the coagulant of choice for many industrial and sanitary wastewater treatment applications, due to its high efficiency, effectiveness in clarification, and utility as a sludge dewatering agent. The chemical leaves slight residual color, and offers very good turbidity removal.

    Get Price
  • Optimization of Coagulation Pretreatment Conditions in a ...

    The goal of this project was to identify optimal coagulation pretreatment conditions and cleaning protocols in a pilot-scale ceramic membrane system. A matrix of coagulation conditions (coagulant dose and pH) was investigated using aluminum sulfate and ferric chloride at two source waters (river and lake).

    Get Price
  • Feasibility and optimization of wastewater treatment by ...

    2020-11-17 · Conditions optimization was realized by single factor analysis and orthogonal test designs. The objectives of this study are to (1) select an optimal coagulant for CEPT process; (2) evaluate the influence of agitation, coagulation time, set - tling time, pH and dosage thus determining an optimal working conditions combination. 2. Material and ...

    Get Price
  • ISSN: 0975-766X CODEN: IJPTFI Available Online through ...

    2016-7-24 · The results showed that after using the poly aluminum chloride, ferrous sulfate, ferric chloride and aluminum sulfate coagulants, in the turbidity of 200, 100, 50, 20, 10 NTU, the pH level have reduced in a way that by increasing each mg/l poly aluminum chloride, ferrous sulfate, ferric chloride about 0.01 unit pH have reduced.

    Get Price
  • Comparison and optimization of the performance of

    2019-11-14 · This study aims to assess the efficiency of two natural-based coagulants, namely calcium lactate and tannic acid, and compare them with conventional coagulants, including polyaluminium chloride (PACl) and ferric chloride. Jar test experiments were performed on the raw inlet water of the Isfahan water treatment plant (IWTP) in Iran.

    Get Price
  • Ferric chloride as a coagulant' Keyword Found

    Optimization of coagulation with ferric chloride as a . Sciencedirect.com DA: 21 PA: 38 MOZ Rank: 59. The efficiency of coagulation with ferric (III) chloride is influenced by the pH, as it determinate the form of hydrolyzed products (Yan et al., 2009) with a suggested optimal range between 4.5 and 6.0 (Yan et al., 2008, Matilainen et al., 2010).

    Get Price
  • Optimization of Electrospinning Conditions for Magnetic ...

    2021-7-15 · prepared on the optimum conditions: 12wt% concentration, 20 kV voltages, 20 cm tips to collector distance and 0.5 mL/h flow rate. At the optimal operating conditions for electrospinning, the role of MNPs content on the nanofibers diameter and specific surface area were explored. It was shown for the first time that, when the Fe 3 O 4

    Get Price
  • Studies of hydrolyzed aluminum chloride solutions. 1 ...

    2019-5-26 · High-concentration polyaluminum chloride: Preparation and effects of the Al concentration on the distribution and transformation of Al species. Chemical Engineering Journal 2009, 155 (1-2) , 528-533. DOI: 10.1016/j.cej.2009.08.007. Huijuan Liu, Chengzhi Hu, He Zhao, Jiuhui Qu.

    Get Price
  • Water Treatment and Purification - Lenntech

    Lenntech Water Treatment solutions is a design and manufacturing company serving numerous industries. Since 1993, we’ve been delivering innovative and sustainable solutions for several applications and processes of water treatment, wastewater reuse and membrane separation.

    Get Price
  • Study on Morphology and Rheological Property of

    2020-1-24 · This work attempted to establish the relationship between the dispersion morphology and the viscous flow behavior of clay dispersions in soybean oil fatty acid ethyl ester (FAEE) at 2 and 65 °C. The clays used in this study include raw montmorillonite (Mt) and three kinds of organoclays prepared by ion exchange modification of Mt by cetyltrimethylammonium chloride (OC16 ...

    Get Price